低溫液顯瀝青延伸儀；技術參數 

電源電壓：220±10% 50HZ±0.5HZ

控溫范圍：0-50±0.5℃

制冷功率：1.2KW

加熱功率：1.5KW

大延度：150㎝.200㎝

延伸速度：5 ㎝±0.25㎝/min 1㎝±0.05㎝/min

液晶顯示，自動計算3個試樣的平均值，內存試驗數據20組（分單速、雙速兩種）

 低溫液顯瀝青延伸儀；工作原理 

1.機械拉伸裝置由低速電機驅動,通過變速箱傳動齒輪齒條,使其從一端向另一端移動.在傳動裝置上還設有變速機構,可以獲得50 mm/min和10 mm/min兩種不同的拉伸速度.

2.溫度控制裝置由制冷系統(壓縮機、冷凝器、風機等)和加熱器、水泵、水箱等組成.通過水泵循環,使水槽內水溫在5-50℃恒溫可調.

3.延度液晶顯示器能直接顯示三個試件的延伸長度,并能自動計算、顯示三個試樣延度的平均值.

 ；控制器操作說明

1. 溫度部分操作:接通電源,儀表上排顯示測量溫度值,即實際溫度。下排顯示設定溫度值。

 儀表采用輕觸開關進行參數設定，面板上有四個鍵，SET 鍵用于進入溫度設定狀態，p 、q 和t鍵用于修改數據。按SET鍵3秒，儀表上排顯示“SET”，進入設定值設定狀態，下排顯示原設定值。此時便可對控制溫度進行設定和修改。每按p鍵一次，閃爍的數字加1，當累加值大于9時，自動進位1；每按q鍵一次，閃爍的數字減1，當遞減值小于0時，自動錯位1；每按t鍵一次，下排的閃爍數字左移一次。

2.計值部分操作:開機,液晶屏顯示名稱,延時4秒左右,顯示工作界面,有時間、速度、計值1、計值2、計值3及平均值。“循環”鍵為反復鍵,按一次,水泵動作,再按一次,水泵不動作, 再按一次,水泵又動作。如此反復。試驗準備好后,按“試驗”鍵,控制器輸出,使電機啟動,開始拉伸試件, 用眼觀察,當試件斷裂時,按“計值”鍵一下，以記錄長度1，長度2，長度3。長度3計完后，屏上顯示平均值。試驗完成，此時可按“保存”鍵，保存此次試驗的時間、長度1、2、3及平均值。低溫數顯瀝青延伸儀數據可保存20組，十年時間。如須進行下次試驗，按“試驗”鍵開始新試驗。

查詢保存的數據：按“設定”鍵，屏上顯示查詢記錄，每按“→”鍵一次，顯示一組新數據，按試驗先后順序排列，20組數據循環顯示。如系統內無記錄，按“→”鍵，顯示為00年00月00日00時00分，長度1，2，3都為00000。查到一組新數據后，按“清零”鍵，刪除此組數據，一旦數據被刪除，數據將永遠無法找回，請謹慎使用“清零”鍵。在此界面下，按“設定”鍵，進入[日期時間設定界面]。每次查詢數據后必須按“設定”鍵，進入[日期時間設定界面]，再按“設定”鍵進入實驗界面。日期時間設定：在實驗界面時，按“設定”鍵，進入查詢記錄，再按“設定”鍵進入[日期時間設定界面]。此時屏上出現一光標，按“→”鍵和“←”鍵可移動光標，把光標移到須改動的數字上，按“+”鍵和“-”鍵，可加減數字，每改變一個數字后，須按“保存”鍵保存，否則修改無效。本系統時間為24小時格式，即下午4點10分應設為16點10分。

；注意事項 

(1) 儀器必須使用有良好接地保護的標準插座;

(2) 開機時,為了保護壓縮機, 儀器設有延時保護裝置,不是故障;

(3) 儀器使用完畢,先關閉所有功能開關,再關閉總電源開關;

(4) 嚴禁水槽內無水時開啟制冷或加熱系統;

(5) 水流循環發生異常(水管堵塞或水泵堵轉、聲音異常等不能正常工作情況)，則水槽內傳感器不能確切反映水箱內溫度，應立即切斷儀器電源，切不可繼續試驗，否則水箱易破裂！！

安徽合肥市路達儀器建材有限公司主營、建筑儀器、瀝青儀器、土工儀器、水泥實驗儀器、分析儀器、測繪儀器、實驗室成套設備、攪拌站成套設備。我公司有多名維修人員為您確保售后及維修設備，另我公司對外出租成套實驗儀器設備